10
8
65
8
8
D
8.
Attach the Tablet Holder (65) to the console
assembly (D) with six M4 x 16mm Screws (8);
start all six Screws, and then tighten them.
Do not overtighten the Screws.
IMPORTANT: The Tablet Holder (65) is
designed for use with most full-size tablets.
Do not place any other electronic device or
object in the Tablet Holder.
77
9.
If necessary, move the incline trainer to the
desired location (see HOW TO MOVE THE
INCLINE TRAINER on page 24).
After the incline trainer is placed in the loca-
tion where it will be used, make sure that the
incline trainer rests firmly on the floor. If the
incline trainer rocks even slightly, turn a Leveling
Foot (77) as needed until the rocking motion is
eliminated.
9
10.
Make sure that all parts are properly tightened before you use the incline trainer.
Keep the included hex
keys in a secure place. One of the hex keys is used to adjust the walking belt (see pages 26 and 27). To pro-
tect the floor or carpet from damage, place a mat under the incline trainer. To avoid damage to the console,
keep the incline trainer out of direct sunlight. Note: Extra parts may be included.
