![background image](http://html2.mh-extra.com/html/icom/vhf-marine-transceiver-ic-m501euro/vhf-marine-transceiver-ic-m501euro_instruction-manual_4733750018.webp)
6
SET MODE
14
Push
16
Beep tone
Beep
ATIS check
ATIS check
Scan mode
Scan mode
Scan resume timer
Scan timer
Dual/tri watch
DUAL/TRI
LCD contrast
LCD
contrast
Internal speaker
Internal
speaker
Scrambler code
Scrambler
code
Scrambler unit
Scrambler
■
Set mode programming
Set mode is used to change the conditions of the trans-
ceiver’s functions: beep tone function, scan mode (normal/pri-
ority), scan resume timer, dual/tri watch, LCD contrast, scram-
ble code, scrambler unit, internal speaker and ATIS code.
Available functions may differ depending on versions.
q
Turn power OFF.
w
While pushing [16], turn power ON to enter set mode.
e
After the display appears, release [16].
r
Push [16] to select the desired item, if necessary.
t
Rotate the channel selector to select the desired condition
of the item.
y
Turn power OFF, then ON again to exit set mode.
• SET MODE CONSTRUCTION
0 IC-M501EURO_3.qxd 03.7.29 15:26 Page 14