![background image](http://html2.mh-extra.com/html/icom/vhf-marine-transceiver-ic-m501euro/vhf-marine-transceiver-ic-m501euro_instruction-manual_4733750015.webp)
■
Description
Dualwatch monitors channel 16 while you are receiving an-
other channel; tri-watch monitors channel 16 and the call
channel while receiving another channel.
■
Operation
q
Select the desired operating channel.
w
Select dualwatch or tri-watch in set mode. (p. 15)
e
Push [DUAL] to start dualwatch or tri-watch.
• “DUAL” appears during dualwatch; “TRI” appears during tri-watch.
• Beep tone sounds when a signal is received on channel 16.
• Tri-watch becomes dualwatch when receiving a signal on the call
channel.
r
To cancel dualwatch/tri-watch, push [DUAL] again.
[Example]:
Operating tri-watch on INT channel 25.
DUALWATCH/TRI-WATCH SIMULATION
• If a signal is received on channel 16, dualwatch/tri-watch pauses
on channel 16 until the signal disappears.
• If a signal is received on the call channel during tri-watch, tri-
watch becomes dualwatch until the signal disappears.
• To transmit on the selected channel during dualwatch/tri-watch,
push and hold [PTT].
Dualwatch
Tri-watch
Call channel
DUAL WATCH/TRI-WATCH
4
11
INT
25W
DUP
16
TAG
TRI
INT
25W
DUP
16
TAG
TRI
BUSY
INT
25W
CALL
16
TAG
CALLING
BUSY
INT
25W
DUP
16
TAG
CALLING
Tri-watch starts.
Signal is received
on call channel.
Signal received on
channel 16 takes
priority.
Tri-watch resumes
after the signal
disappears.
0 IC-M501EURO_3.qxd 03.7.29 15:26 Page 11