![background image](http://html2.mh-extra.com/html/icom/vhf-ic-f50/vhf-ic-f50_instruction-manual_3868315021.webp)
14
3
CONVENTIONAL OPERATION
3
■
Receiving and transmitting
NOTE:
Transmitting without an antenna may damage the trans-
ceiver. See p. 1 for antenna attachment.
Receiving:
q
Rotate [VOL] to turn power ON.
w
Push [
] or [
] to select a channel.
e
When receiving a call, adjust the audio output level to a comfort-
able listening level.
Transmitting:
Wait for the channel to become clear to avoid interference.
q
While pushing and holding [PTT], speak into the microphone at a
normal voice level.
• When a tone signalling system is used, the call procedure de-
scribed at left may be necessary.
w
Release [PTT] to return to receive.
IMPORTANT:
To maximize the readability of your signal;
1. Pause briefly after pushing [PTT].
2. Hold the microphone 5 to 10 cm (2 to 4 inches) from your
mouth, then speak into the microphone at a normal voice
level.
IC-F50_F60_MDC-2.qxd 06.11.17 4:39 PM Page 14 (1,1)