18
3
CONVENTIONAL OPERATION
3
■
User set mode
User set mode is accessed at power ON and allows you to set
seldom-changed settings. In this case you can “customize” trans-
ceiver operation to suit your preferences and operating style.
Entering the user set mode:
q
While pushing and holding [
] and [
], rotate [VOL] to enter
the user set mode at power ON.
w
Push and hold [P0] to enter user set mode. Push [P0] momen-
tarily to select the item.
Then push [
] and [
] to set the desired level/condition.
Available set mode functions:
• Backlight
: ON, Auto or OFF
• Beep
: ON or OFF
• SQL Level
: 0 to 255
• AF Min level
: ON or OFF
• Mic Gain
: 1 to 5
• Battery Voltage : ON or OFF
e
Push and hold [P0] again to exit set mode.
User set mode is also available using a programmable key. Please
refer to p. 11 [User Set Mode] section.
IC-F50_F60_MDC-2.qxd 06.11.17 4:39 PM Page 18 (1,1)
