![background image](http://html2.mh-extra.com/html/icom/vhf-ic-f50/vhf-ic-f50_instruction-manual_3868315031.webp)
24
4
BIIS OPERATION
4
D
D
Calling back from the queue channel
q
While in the standby condition, push [P1] (Digital) for 1 sec. to
enter queue memory channel selection mode.
w
Push [
]/[
] to select the desired record.
e
Push [P0] (Call) or [PTT]* to call.
*PTT call can be made only when PTT call capability is permitted.
NOTE:
When no answer back is received, the transceiver re-
peats the call 3 times (default) automatically, and
“
”
is
displayed during each call. However, an error beep sounds
and
“
”
is displayed when no answer back is received
after the calls.
r
Push [PTT] to transmit; release to receive.
t
Push [P3] (Moni(Audi)) to send the “Clear down” signal.
IC-F50_F60_MDC-2.qxd 06.11.17 4:39 PM Page 24 (1,1)