4-2
■
INSTALLING THE UNIT
1) Remove the screws, and then remove the top cover.
2) Carefully remove three cables (
123
), as shown below.
1
2
3
3) Remove the five screws.
Screws
4) Remove the PCB (FRONT-R UNIT:
1
), and then attach
the unit (
2
).
1
2
5) Secure the unit using the screws removed in step 3.
L
Firmly tighten the screws in the order shown below.
2 3
5
1 4
6) Reattach the cables removed in step 2.
Cables
7) Remove the two caps on the rear panel, as shown
below.
Cap
(Continued on the next page)