6
INSTALLATION AND CONNECTION
3
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
1
2
■
Installing in a system rack
This repeater is designed to be installed in a standard
EIA 19-inch rack.
NOTE:
• Be sure to secure the repeater’s front panel to the
system rack.
• Use the rack that can hold the weight of
approximately 6 kg (13.2 lbs). When installing
multiple repeaters, make sure the rack can
withstand the total weight, including the connected
cables.
19-inch rack
(User supplied)
L
You can also attach to the slide
rail using M4 screw holes.
■
Attaching the rubber feet
For desktop installations, attach the supplied rubber
feet onto the bottom of the repeater, as shown below.
R
WARNING! DO NOT
stack multiple repeaters
on the desk. This could increase the repeater
temperature and damage repeaters or cause fire or
burns.
1
2
Summary of Contents for ID-RP1200VD
Page 23: ...MEMO ...
