manualshive.com logo in svg

Icom ID-880H, Instruction Manual

Share
Download
Icom ID-880H Instruction Manual Download Page 28

13

2

BASIC OPERATION

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

D 

Call/Weather* channels

Call channels are used for quick recall of most-often used 
frequencies. *Weather channels are available for the U.S.A. 
version only.

q

  Push 

[M/CALL]

 several times to select call channels/

Weather channels.

• Memory/Call/Weather channels can be selected in sequence.
• “C0” or “C1” appears when call channel is selected.

w

 Rotate 

[DIAL]

 to select the desired channel.

[M/CALL]

• Call channel indication

• Weather channel indication

MR/CALL

Y

/

Z

z

  Push and hold [MR/CALL] for 1 sec. to se-

lect call channels.

•  Whether channels cannot be selected by the 

HM-133.

x

  Push 

[

]

 or 

[

]

 to select the desired call  

channel.

D 

DR (D-STAR Repeater) mode

DR (D-STAR Repeater) mode is used for the D-STAR re-
peater operation. In this mode, you can select the pre-pro-
grammed repeaters and UR (your) call sign easily.

q

 Push 

[DR]

 to select DR mode.

• “

” appears when call channel is selected.

[DR]

• DR mode indication

Appear

w

 Rotate 

[DIAL]

 to select the desired access repeater.

•  While rotating 

[DIAL]

, S/RF-meter indicates group number.

•  Only programmed access repeaters in RPT-L menu can be se-

lected. See p. 40 for RPT-L (repeter lists) programming details.

MENU 

RPT-L 

ADD-L

 (p. 40)

Summary of Contents for ID-880H




































Reviews:

No comments

Brands by name

Popular brands

Load more brands