3
2
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
±
During FM/FM-N mode operation, push and hold for 1
sec. to enter tone function selection state.
(pgs. 86, 91)
• Rotating
[DIAL]
selects the tone function.
• T (Repeater tone), TSQL
, TSQL, DTCS
, DTCS, tone
squelch reverse, DTCS squelch reverse or tone function OFF
can be selected.
±
During DV mode operation, push and hold for 1 sec. to
select digital call sign squelch, digital code squelch and
no squelch operation in sequence. (p. 149)
• DSQL
, DSQL, CSQL
,
CSQL or digital call squelch
OFF can be selected.
u
D-STAR REPEATER•YOUR KEY [DR•UR]
±
Push to select DR mode.
(p. 21)
• Rotating
[DIAL]
selects access repeater.
• DV mode is automatically selected.
±
During DV mode operation, push and hold for 1 sec. to
enter your call sign selection state.
(p. 30)
• Rotating
[DIAL]
selects your call sign.
• DV mode is automatically selected.
i
CALL SIGN•RX CALL WRITE KEY [CS•RX
CS]
±
Push to display the current call sign.
(p. 21)
• Rotating
[DIAL]
selects UR (your) call sign, R1 (access re-
peater) call sign, R2 (link repeater) call sign and MY (your
own) call sign.
±
Push and hold for 1 sec. to set the received call signs
(stations and repeaters) to current call sign.
(p. 30)
o
OUTPUT POWER•DUPLEX KEY [LOW•DUP]
±
Each push changes the output power selection.
(p. 21)
• LOW, MID and HIGH (no indicator visible) are available.
±
Push and hold for 1 sec. to enter duplex operation se-
lection state.
(p. 30)
• Rotating
[DIAL]
selects the tone function.
• DUP– (minus duplex), DUP (plus duplex) and simplex (no
indicator visible) are available.
!0
MONITOR•DTMF KEY [MONI•DTMF]
±
Push to turn the monitor function ON and OFF.
(p. 24)
±
Push and hold for 1 sec. to enter DTMF set mode.
(p. 82)
!1
SQUELCH CONTROL [SQL]
Varies the squelch level for left and right band.
(p. 20)
• The RF attenuator activates and increases the attenuation when
rotated clockwise at and beyond the center position. (p. 22)
!2
POWER KEY [PWR]
Push and hold for 1 sec. to turn power ON and OFF.
!3
MICROPHONE CONNECTOR
(p. IV)
Connects the supplied or an optional microphone.
:
2
q
+8 V DC output (Max. 10 mA)
w
Channel up/down
e
8 V control IN
r
PTT
t
GND (microphone ground)
y
MIC (microphone input)
u
GND
i
Data IN
!4
VOLUME CONTROL [VOL]
(p. 20)
Adjusts the audio level for left or right band.
