XI
QUICK REFERENCE GUIDE
The ID-880H has a total of 1052 memory channels
(including
25 pairs scan edges and 2 call channels)
for storing often used
operating frequency, repeater settings, etc.
1. Setting a frequency
In VFO mode, set the desired operating frequency with re-
peater, tone and tuning steps, etc.
±
Push
[VFO/MHz]
to select VFO.
±
Rotate
[DIAL]
to set the desired frequency.
•
Set other data, such as repeater tone, duplex information, tuning
step), if desired.
2. Selecting a memory channel
Push
[S.MW]
, then rotate
[DIAL]
to select the desired mem-
ory channel.
• “
X
” indicator and memory channel number blink.
[S.MW ]
3. Writing a memory channel
Push and hold
[MW]
(S.MW) for 1 sec. to program.
• 3 beeps sound
• Return to VFO mode automatically after programming.
• Memory channel number automatically increases when continuing
to push
[MW]
(S.MW) after programming.
Using the HM-133
q
Push [MR/CALL] to select memory mode.
w
Push [
ENT
C(T-OFF)] first, then enter the desired memory
channel via the keypad.
e
Push [VFO/LOCK] to select VFO mode, then set the de-
sired operating frequency, including offset direction, tone
settings, etc.
±
Push [VFO/LOCK] to select VFO.
±
Push [
ENT
C(T-OFF)] first, then enter the desired operat-
ing frequency via the keypad.
•
Set other data, such as repeater tone, duplex information,
tuning step, if necessary.
r
Push [FUNC] then push and hold [
CLR
A(MW)] for 1 sec. to
program.
Push , then
• 3 beeps sound
•
Memory channel number automatically increases when continu-
ing to push [
CLR
A(MW)] after programming.
N
Programming memory channels
