![background image](http://html2.mh-extra.com/html/icom/ic-v85/ic-v85_instruction-manual_3766801037.webp)
24
5
REPEATER OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
D
D
Tone information
Some repeaters require different tone system to be accessed.
DTMF TONES
While pushing
[PTT]
, push the desired DTMF keys (
[0]
–
[9]
,
[A]
,
[B]
,
[C]
,
[D]
,
[#]
and
[
✱
]
) to transmit DTMF tones.
•
[
✱
]
transmits tone “E,”
[#]
transmits tone “F.”
• The transceiver has 16 DTMF memory channels (p. 32).
1750 Hz TONE
While pushing
[PTT]
, push
[
Y
Y
]
or
[
Z
Z
]
to transmit a 1750 Hz
tone signal.
✔
Convenient
Tone scan function:
When you don’t know the subaudible
tone used for a repeater, the tone scan is convenient for de-
tecting the tone frequency.
Push
[FUNC]
, then push
[
T
.
SCAN
]
(3) to start the tone scan.
• Push
[CLR]
to cancel the scan.
• When the required tone frequency is detected, the scan pauses.
■
Repeater lockout
This function helps prevent interference to other stations by
inhibiting your transmission when a signal is received. The
transceiver has two inhibiting conditions, repeater and busy.
q
While pushing and holding
[
Y
Y
]
and
[
Z
Z
]
, turn the power ON
to enter
INITIAL SET MODE
.
w
Push
[
Y
Y
]
or
[
Z
Z
]
several times until “RLO” appears.
e
Rotate
[VOL]
to select the repeater lockout function to
“RP,” “bU” or OFF.
• “RP”: Transmit is inhibited when a signal with un-matched sub-
audible tone is received.
• “bU”: Transmit is inhibited when a signal is received.
r
Push
[
✱
ENT
]
(or
[CLR]
) to exit
INITIAL SET MODE
.
USING
INITIAL SET MODE