![background image](http://html2.mh-extra.com/html/icom/ic-v85/ic-v85_instruction-manual_3766801059.webp)
46
10
PAGER/CODE SQUELCH
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
• PERSONAL CALLS
This display appears when you are called with your ID code
and the calling station’s ID code is 123.
• GROUP CALLS
This display appears when you are called with the group
code, 888, and 888 has been programmed into code channel
C6.
• ERROR INFORMATION
When the transceiver receives an incomplete code, “E” and
previously received code appear.
■
Code squelch
When using code squelch you will only receive calls from sta-
tions which know your ID or group code. A 3-digit code is sent
each time
[PTT]
is pushed in order to open the receiving sta-
tion’s code squelch prior to voice transmission.
q
Set the operating frequency.
• Set the volume and squelch to the desired level as in normal op-
eration.
w
Push
[FUNC]
, then push
[
OPT
]
(0).
• Rotate
[VOL]
to select “dtm.CS,” if “dtm.PG” or “dtm.OF” ap-
pears.
e
Select the desired transmit code channel:
➥
Push and hold
[
OPT
]
(0) for 1 sec. to enter code selec-
tion mode.
➥
Rotate
[VOL]
(or push
[
Y
Y
]
/
[
Z
Z
]
) to select the desired
code channel.
➥
Push
[
✱
ENT
]
(or
[CLR]
) to exit code selection mode and
return to previous mode.
• 100 MHz digit shows “C.”
r
Operate the transceiver in the normal way (push
[PTT]
to
transmit; release
[PTT]
to receive).
t
To cancel the code squelch, push
[FUNC]
and
[
OPT
]
(0),
then rotate
[VOL]
to select “dtm.OF.”
• 100 MHz digit shows “1” when the function is cancelled.
Previously received code.
Code channel
“CP” and “ ” blink.
During channel number indication
(described on page 20)
To use these functions in channel number indication, the
pager/code squelch setting must be programmed with other
memory contents before selecting channel number indication.