![background image](http://html2.mh-extra.com/html/icom/ic-t81a/ic-t81a_instruction-manual_4733588025.webp)
21
7
DTMF MEMORY
■
Programming a DTMF code
The transceiver has 9 DTMF memory channels (D1 to D9) for
storage of often-used DTMF codes of up to 16 characters.
➀
Push [
(MR)
MW] for 1 sec. to enter
memory write mode; then push
[MULTI(
↕
)] to enter DTMF memory
mode.
• One of “D1” to “D9” appears and
flashes.
➁
Rotate [DIAL] (or push [MULTI(
↔
)])
to select the desired channel.
➂
Push [MULTI] to enter DTMF pro-
gramming mode.
• The first character of the DTMF code
flashes.
➃
Push digit keys (or rotate [DIAL] or
push [MULTI(
↕
)]) to enter the de-
sired DTMF character; then push
[MULTI(
↔
)] to advance to the next
character.
• A maximum of 16 characters can be input.
• Pushing [MULTI(
↕
)] can also be used to enter DTMF characters.
• When pushing [SQL], the programmed contents can be moni-
tored.
➄
Push [MULTI] to input the digits; then push [VFO] to exit
DTMF programming mode.
■
Transmitting a DTMF code
D
Using a DTMF memory channel
➀
Push [
(MR)
MW] for 1 sec. to enter memory write mode;
then push [MULTI(
↕
)] to enter DTMF memory mode
• One of “D1” to “D9” appears.
➁
Rotate [DIAL] (or push [MULTI(
↔
)]) to select the desired
channel.
➂
While pushing [PTT], push [SQL] to transmit the selected
DTMF channel’s contents.
D
Manual DTMF code transmission
➀
While pushing [PTT], push digit keys to transmit a DTMF
code manually.
➁
Release [PTT] to return to receive.
D
DTMF transmit speed
When slow DTMF transmission speeds are required (such as
for some repeaters) the transceiver’s rate of DTMF transmis-
sion can be adjusted.
➀
While pushing [MULTI], push [PWR] to turn power on and
enter initial set mode.
➁
Push [MULTI(
↕
)] one or more times
until “DT” appears.
➂
Rotate [DIAL] (or push [MULTI(
↔
)])
to select the a transmit speed.
• 100 (default), 200, 300 and 500 msec. are available.
➃
Push [VFO] to exit initial set mode.
USING
INITIAL SET MODE
IC-T81A/E Manual-(1) 01.12.5 6:55 PM Page 21 (1,1)