![background image](http://html2.mh-extra.com/html/icom/ic-t81a/ic-t81a_instruction-manual_4733588024.webp)
20
6
MEMORY/CALL PROGRAMMING
■
Memory names
Memory channels can be programmed with names of up to
six characters.
➀
Push [VFO] to select VFO mode (or select a memory chan-
nel).
➁
Push [
(MR)
MW] for 1 sec.
• “
X
” and the previously selected
memory channel number flash.
➂
Push [MULTI(
↔
)] (or rotate [DIAL])
to select the desired memory chan-
nel.
➃
Push [MULTI(
↕
)] so that “NAME”
appears.
• Not valid for call channels.
➄
Push [MULTI] to enter name editing
mode.
• The first character of the name flashes.
➅
Rotate [DIAL] (or push [MULTI(
↕
)]
to select a character; then, push
[MULTI(
↔
)] to advance to the next
character.
➆
Repeat step
➅
until the desired
name appears.
➇
Push [MULTI] to program the name
and return to the “NAME” display;
then push [VFO] to return to VFO
MR
FM
W
MR
FM
W
MR
FM
W
MR
FM
W
mode.
• Push [
(MR)
MW] for 1 sec. to erase a channel’s name and return
to VFO mode.
• When in memory mode push [MR] to toggle between memory
name indication and frequency indication.
☞
NOTE:
To clear a memory name (or remove one or more
characters from a name) without clearing the rest of the
memory channel contents, follow steps
➀
to
➇
at left and
insert an underscore “_” in place of other characters in
steps
➅
and
➆
.
IC-T81A/E Manual-(1) 01.12.5 6:55 PM Page 20 (1,1)