![background image](http://html1.mh-extra.com/html/icom/ic-m710rt/ic-m710rt_instruction-manual_2038007024.webp)
20
7
CONNECTIONS AND INSTALLATION
■
Connector information
ACC(1)*
PIN PIN NAME
DESCRIPTION
SPECIFICATIONS
1
CWK
CW and FSK keying input.
Input level: Less than 0.6 V for transmit.
2
GND
Connects to ground.
Connected in parallel with ACC(2) pin 2.
Input/output pin.
Ground level: –0.5 to 0.8 V
3
SEND
Goes to ground when transmitting.
Input current: Less than 20 mA
When grounded, transmit.
Connected in parallel with ACC(2) pin 3.
4
MOD
Modulator input.
Input impedance: 10 k
Ω
Usable when pin 3 is grounded.
Input level: Approx. 100 mV rms
5
AF
AF detector output.
Output impedance: 4.7 k
Ω
Fixed, regardless of [AF] position.
Output level: 100–300 mV rms
6
SCAN
Starts scan when grounded.
Scan operation: Less than 0.6 V
7
13.6 V
13.6 V output when power is ON.
Output current: Max. 1 A
Connected in parallel with ACC(2) pin 7.
Control voltage: –3 to 0 V
8
ALC
ALC voltage
Input impedance: More than 10 k
Ω
Connected in parallel with ACC(2) pin 5.
ACC(2)*/ACC* PIN PIN NAME
DESCRIPTION
SPECIFICATIONS
1
8 V
Regulated 8 V output.
Output voltage: 8 V ±0.3 V
Output current: Less than 10 mA
2
GND
Same as ACC(1) pin 2.
3
SEND
Same as ACC(1) pin 3.
4
NC
No connection.
5
ALC
Same as ACC(1) pin 8.
6
RLC
T/R relay control output.
When transmitting: 0 V (less than 0.5 A)
7
13.6 V
Same as ACC(1) pin 7.
MICROPHONE PIN PIN NAME
DESCRIPTION
SPECIFICATIONS
1
MIC+
Audio input from the microphone
Input impedance: 600
Ω
element.
2
NC
No connection.
3
AF1
AF output controlled with [VOLUME].
Connected to pin 4 in the microphone.
4
AF2
AF input.
Connected to pin 3 in the microphone.
5
PTT
PTT switch input.
When grounded, transmits.
6
GND
Connected to ground.
7
MIC–
Coaxial ground for MIC+.
8
AF–
Coaxial ground for AF1 and AF2.
TUNER
PIN PIN NAME
DESCRIPTION
SPECIFICATIONS
1
KEY
Key signal input.
–0.5 to 0.8 V during tuning.
2
START
Start signal output.
Pulled up 8 V, 0 V (100 msec) as a start signal.
3
13.6V
13.6 V output.
Maximum current: 2 A
4
E
Negative terminal.
USA version (See below for Europe version.)
ANTC
Antenna current input.
Input level: Approx. 2 V rms
1
2
3
4
5
6
7
8
2
4
5
1
3
6
7
6
5
4
1
2
3
8
7
* ACC(2): Marine and general version; ACC: GMDSS version.
*ACC(1): Marine and general versions only.
IC-M710RT.qxd 02.1.9 9:03 Page 20