![background image](http://html1.mh-extra.com/html/icom/ic-m710rt/ic-m710rt_instruction-manual_2038007016.webp)
12
5
USER CHANNEL PROGRAMMING
■
Programming a frequency
The IC-M710RT has up to 160 user-programmable
channels each with channel name capability of up to 7
alphanumeric characters.
☞
NOTE:
ITU simplex channels can be programmed
as well as user channels. However, transmit fre-
quencies cannot be programmed as it is not neces-
sary.
D
Receive frequency
➀
Select the desired channel to be programmed.
• Channels 1 to 160 (maximum) are programmable.
➁
Push [CE] to select frequency selection mode.
• “
s
” and frequency appear on the display.
➂
Enter the desired frequency via the keypad—5 or
6 digits.
• Or rotate the [CHANNEL] selector to change the fre-
quency.
➃
To change the operating mode (type of emission),
push [MODE] one or more times.
➄
Push and hold [RX] for 1 sec. to program the user
channel.
D
Transmit frequency
(Not applicable for General versions)
➀
Select the desired user channel to be programmed.
➁
Push [TX].
• “
$
” flashes.
➂
Push [CE] to select frequency selection mode.
• “
s
” and frequency appear on the display.
➃
Enter the desired frequency via the keypad with 5
or 6 digits.
• The [CHANNEL] selector cannot be used.
➄
Push and hold [TX] for 1 sec. to program.
➅
Push [TX] to stop “
$
” from flashing.
D
Channel names
➀
Select the desired user channel to be programmed.
➁
Push [CH/FREQ] to select channel indication.
➂
Push [FUNC] then [CE].
• The channel name (alphanumeric) readout flashes.
➃
Rotate the [GROUP] selector for cursor position
and the [CHANNEL] selector for name content.
• To return to the previous message, push [CE].
➄
Push and hold [RX] to program the name.
• Flashing stops.
D U P
T X
RX
D S C
F
AGC
A L M
D U P
T X
RX
D S C
F
AGC
A L M
D U P
T X
RX
D S C
F
AGC
A L M
Push [CE]
Frequency and “
≈
” appear.
Set frequency
Use keypad or channel selector.
Push and hold [RX]
Programming is completed.
D U P
T X
RX
D S C
F
AGC
A L M
D U P
T X
RX
D S C
F
AGC
A L M
D U P
T X
RX
D S C
F
AGC
A L M
Push [TX]
“
$
” flashes.
Push [CE]
Push and hold [TX]
after entering a
frqeuency
D U P
T X
RX
D S C
F
AGC
A L M
D U P
T X
RX
D S C
F
AGC
A L M
D U P
T X
RX
D S C
F
AGC
A L M
Push [FUNC]
then [CE]
“
$
” flashes.
Rotate [GROUP]
and [CHANNEL]
to select cursor and
character
Push [RX]
IC-M710RT.qxd 02.1.9 9:03 Page 12