![background image](http://html.mh-extra.com/html/icom/ic-m505/ic-m505_instruction-manual_612825027.webp)
21
6
DSC OPERATION
6
■
Position and time programming
A distress call should include the ship’s position and time
data. If no GPS is connected, your position and UTC (Uni-
versal Time Coordinated) time should be input manually.
They are included automatically when a GPS receiver
(NMEA0183 ver. 2.0 or 3.01) is connected.
q
Push
[MENU]
to enter the DSC menu.
w
Rotate
[CHANNEL]
to select “
Position Input
,” and
push
[CHANNEL•ENTER]
.
--DSC Menu--
Select Item
˘Position Input
Individual Call
Group Call
All Ships Call
Position Request
Position Report
e
The position information appears. Set your position (lati-
tude and longitude) data by rotating
[CHANNEL]
.
• Push
[16•C]
or
[DIAL•DUAL/GRP]
to move the cursor forward
or backward, respectively.
• Rotate
[CHANNEL]
to edit N; North latitude or S; South latitude
when the cursor is on the ‘N’ or ‘S’ position, and W; West lon-
gitude or E; East longitude when the cursor is on the ‘W’ or ‘E’
position.
• Push
[CLR]
for 1 sec. to clear the latitude/longitude data.
• Push
[CLR]
to cancel and return to the DSC menu.
--DSC Menu--
Input Position
Latitude
__°__.___N
Null
Longitude
__°__.___W
Null
<CLR 1sec
˘Null Data>
<CLR
˘Exit / ENT˘OK>
r
After setting the position data, push
[CHANNEL•ENTER]
to set the current UTC time. Set the current UTC time by
rotating
[CHANNEL]
, then push
[CHANNEL•ENTER]
.
• Push
[16•C]
or
[DIAL•DUAL/GRP]
to move the cursor forward
or backward, respectively.
• Push
[CLR]
for 1 sec. to clear the UTC time data.
• Push
[CLR]
to cancel and return to the DSC menu.
--DSC Menu--
Input UTC Time
__:__
Null
<CLR 1sec
˘Null Data>
<CLR
˘Exit / ENT˘OK>
t
Push
[CLR]
or rotate
[CHANNEL]
to select “
Exit
,” push
[CHANNEL•ENTER]
.
• Returns to the DSC menu.
• Repeat again to return to the normal operation condition.
Manually programmed position data will be held for 23.5
hours only.
Summary of Contents for IC-M505
