![background image](http://html.mh-extra.com/html/icom/ic-m505/ic-m505_instruction-manual_612825006.webp)
v
R
WARNING! NEVER
connect the transceiver to an
AC outlet. This may pose a fire hazard or result in an electric
shock.
R
WARNING! NEVER
connect the transceiver to a
power source of more than 16 V DC or use reverse polarity.
This will ruin the transceiver.
R
WARNING! NEVER
cut the DC power cable between
the DC plug at the back of the transceiver and fuse holder. If
an incorrect connection is made after cutting, the transceiver
may be damaged.
CAUTION: NEVER
place the transceiver where normal
operation of the vessel may be hindered or where it could
cause bodily injury.
KEEP
the transceiver and microphone at least 1 m away
from the vessel’s magnetic navigation compass.
DO NOT
use or place the transceiver in areas with tem-
peratures below –20°C or above +60°C or, in areas subject
to direct sunlight, such as the dashboard.
DO NOT
use chemical agents such as benzine or alcohol
when cleaning, as they may damage the transceiver sur-
faces. If the transceiver becomes dusty or dirty, wipe it clean
with a soft, dry cloth.
BE CAREFUL!
The transceiver rear panel will become
hot when operating continuously for long periods.
Place the transceiver in a secure place to avoid inadvertent
use by children.
BE CAREFUL!
The transceiver and the optional HM-
162E
commandmic
iii
™
meet IPX8 requirements for water-
proof protection. However, once the transceiver has been
dropped, waterproof protection cannot be guaranteed be-
cause of possible damage to the transceiver’s case or the
waterproof seal.
Approved Icom optional equipment is designed for optimal
performance when used with an Icom transceiver.
Icom is not responsible for the destruction or damage to an
Icom transceiver in the event the Icom transceiver is used
with equipment that is not manufactured or approved by Icom.
PRECAUTIONS
Summary of Contents for IC-M505
