Icom IC-M505 Instruction Manual Download Page 11

Page: 11 / 81

PANEL DESCRIPTION

POSITION INDICATOR

➥

Shows the current position data when a GPS re-

ceiver is connected, or the time data is manually pro-
grammed.

• “

” may blink every 2 sec. instead of position data when

the GPS position data is invalid. The last position data is
held for 23.5 hours only, and after that, “

No Position

”

will appear.

• “

” may blink every 2 sec. instead of position data, after

4 hours have passed from the time that is manually pro-
grammed. The manually programmed position data is held for
23.5 hours only, and after that, “

No Position

” will ap-

pear.

➥

“

No Position

” appears when no GPS receiver is

connected and no position data is input manually.

SCAN INDICATOR

➥

“

PRI-SCAN 16

” appears during Priority scan;

“

NORMAL SCAN

” appears during Normal scan. (p. 13)

➥

“

DUAL 16

” appears during Dualwatch; “

TRI 16

” ap-

pears during Tri-watch. (p. 14)

SCRAMBLER INDICATOR

(p. 11)

Appears when the voice scrambler function is activated.

(only when the optional scrambler unit is installed.)

BUSY/TRANSMIT INDICATOR

(p. 8)

➥

“

BUSY

” appears when receiving a signal or when the

squelch opens.

➥

“

” appears while transmitting.

■

Microphone

Microphone

Speaker

PTT SWITCH [PTT]

Push and hold to transmit; release to receive. (p. 8)

CHANNEL UP/DOWN KEYS [

]/[

]

➥

Push either key to change the operating memory chan-

nel, Set mode settings, etc. (pp. 6, 7, 55)

➥

Checks TAG channels, changes scanning direction or

resumes the scan manually during scan. (p. 13)

TRANSMIT POWER KEY [HI/LO]

➥

Toggles power high and low when pushed. (p. 8)

• Some channels are set to low power only.

➥

While pushing and holding

[HI/LO]

, turn power ON

to toggle the Microphone Lock function ON or OFF.
(p. 10)

Summary of Contents for IC-M505


















































































Search results

Summary of Contents for IC-M505

Reviews:

Related manuals for IC-M505

Brands by name

Popular brands

Icom IC-M505, Instruction Manual

Search results

Summary of Contents for IC-M505

Reviews:

Related manuals for IC-M505

Brands by name

Popular brands