Icom IC-M504 Instruction Manual Download Page 64

Page: 64 / 81

CONNECTIONS AND MAINTENANCE

■

Connections

NMEA IN LEAD (Red)

Connects to a GPS receiver for position indication.

• A NMEA0183 ver. 2.0 or 3.01 (sentence formatters RMC, GGA,

GNS, GLL and VTG) compatible GPS receiver is required. Ask
your dealer about suitable GPS receivers.

NMEA OUT LEAD (White)

Connects to a PC or navigation equipment (NMEA0183

ver. 3.01 sentence formatters DSC, DSE compatible) for

position data received from other ships.

EXTERNAL SPEAKER LEAD (Yellow)

Connects to an external speaker.

HAILER/FOGHORN (–) LEAD (Black)

Connects to a hailer speaker (25 W nominal at 13.8 V/4

HAILER/FOGHORN (+) LEAD (Blue)

Connects to a hailer speaker (25 W nominal at 13.8 V/4

ANTENNA CONNECTOR

Connects a marine VHF antenna with a PL-259 connec-

tor to the transceiver.

CAUTION:

Transmitting without an antenna may dam-

age the transceiver.

GROUND TERMINAL

Connect this terminal to a vessel ground to prevent elec-

trical shocks and interference from other equipment oc-
curring. Use a self-tapping screw (3

8 mm.)

EXTERNAL MICROPHONE JACK

Connects the optional command microphone.

MICROPHONE CONNECTOR

Connects the supplied microphone depending on version.
Ask your dealer for details.

DC POWER CONNECTOR

Connects the supplied DC power cable from this connec-

tor to an external 12 V battery.

Do not
loose!

r
t

Inner conductor

Outer conductor

: NMEA OUT (+)

: NMEA OUT (−)

Inner conductor

Outer conductor

: NMEA IN (+)

: NMEA IN (−)

Inner conductor

Outer conductor

: Speaker (+)

: Speaker (−)

Summary of Contents for IC-M504


















































































Search results

Summary of Contents for IC-M504

Reviews:

Related manuals for IC-M504

Brands by name

Popular brands

Icom IC-M504, Instruction Manual

Search results

Summary of Contents for IC-M504

Reviews:

Related manuals for IC-M504

Brands by name

Popular brands