Icom IC-M504 Instruction Manual Download Page 57

Page: 57 / 81

OTHER FUNCTIONS

• While in the Intercom mode, the transceiver functions

(transmit and receive) are interrupted. If the transceiver
is in transmit condition, the Intercom function is not avail-
able.

• When a DSC call is received, the intercom function is

interrupted with an automatic return to the transceiver
mode. The transceiver’s display indicates ‘Receiving
DSC calls.’ (p. 41)

• When a WX alert is received, “

WX ALERT

” blinks and

a beep sounds. The WX alert sounds after the Intercom
use is finished.

■

RX Speaker function

The IC-M504 has an RX Speaker function. When this func-
tion is turned ON, the received audio can be heard on the
deck or tower via a hailer speaker.

Connect a hailer speaker as described on p. 58.

Push and hold

[HAIL•RX ]

for 1 sec. to enter the RX

Speaker mode.

• “

” appears

• Rotate

[DIAL]

to adjust the audio output level, push

[DIAL•ENTER]

To return to normal operation, push and hold

[HAIL•RX ]

for 1 sec.

While in the RX Speaker mode, rotate

[DIAL]

while push-

ing and holding

[HAIL•RX ]

to adjust the audio output

level. After adjusting, push

[DIAL•ENTER]

• Rotate

[DIAL]

within 1 sec. after pushing

[HAIL•RX

]

. Other-

wise the transceiver returns to the normal operation.

25W

INT

TAG

RX
15

<ENT˘OK>

CALLING

Push and hold

for 1 sec.

Summary of Contents for IC-M504


















































































Search results

Summary of Contents for IC-M504

Reviews:

Related manuals for IC-M504

Brands by name

Popular brands

Icom IC-M504, Instruction Manual

Search results

Summary of Contents for IC-M504

Reviews:

Related manuals for IC-M504

Brands by name

Popular brands