manualshive.com logo in svg

Icom IC-M504, Instruction Manual

Share
Download
Icom IC-M504 Instruction Manual Download Page 19

13

4

SCAN OPERATION

4

■

 Setting TAG channels

For more efficient scanning, add the desired channels as 
TAG channels or clear the TAG for unwanted channels. 
Channels that are not tagged will be skipped during scan-
ning. TAG channels can be assigned to each channel group 
(USA, INT, CAN) independently.

q

  While pushing and holding 

[H/L]

, push 

[CH/WX•DUAL•U/I/C]

 

to select the desired channel group (USA, INT or CAN.)

w

 Select the desired channel to be set as a TAG channel.

e

  Push 

[SCAN•TAG]

 for 1 sec. to set the displayed channel 

as a TAG channel.

  • “

TAG

” appears in the display.

r

  To cancel the TAG channel setting, repeat step 

e

.

  • “

TAG

” disappears.

✔

 Clearing (or setting) all tagged channels

While pushing and holding 

[H/L]

, push 

[SCAN•TAG]

 for 3 

sec. (until a long beep changes to 2 short beeps) to clear all 
TAG channels setting in the channel group.

• Repeat above procedure to set all TAG channels.

■

 Starting a scan

Set scan type (Priority or Normal scan) and scan resume 
timer in advance, using Set mode. (p. 55)

q

  While pushing and holding 

[H/L]

, push 

[CH/WX•DUAL• 

U/I/C]

 to select the desired channel group (USA, INT, 

CAN) if desired.

w

  Set TAG channels as described at left.

e

  Make sure the squelch is closed to start a scan.

r

 Push 

[SCAN•TAG]

 to start Priority or Normal scan.

  •  “

PRI-SCAN  16

” appears at the channel comment indicator 

during Priority scan.

  •  “

NORMAL  SCAN

” appears at the channel comment indicator 

during Normal scan.

  •  When a signal is detected, scan pauses until the signal disap-

pears or resumes after pausing 5 sec. according to Set mode 
setting. (Channel 16 is still monitored during Priority scan.)

  •  Rotate 

[DIAL]

 to check the scanning TAG channels, to change 

the scanning direction or resume the scan manually.

  •  A beep tone sounds and “

16

” blinks at the channel comment 

indicator when a signal is received on Channel 16 during Prior-
ity scan.

Push

Scan starts.

When a signal is received

25W

INT

DUP

34°34.506N

123°23.236W

UTC 12:00

INTL

BUSY 25W

INT

DUP

NORMAL SCAN

34°34.506N

123°23.236W

UTC 12:00

SAFETY

25W

INT

DUP

TAG

NORMAL SCAN

34°34.506N

123°23.236W

UTC 12:00

[Example]:

 Starting a normal scan.

Summary of Contents for IC-M504


















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands