Icom IC-M504 Instruction Manual Download

Page: 11 / 81

PANEL DESCRIPTION

POSITION INDICATOR

➥

Shows the current position data when a GPS re-

ceiver is connected, or the time data is manually pro-
grammed.

• “

” may blink every 2 sec. instead of position data when

the GPS position data is invalid. The last position data is
held for 23.5 hours only, and after that, “

No Position

”

will appear.

• “

” may blink every 2 sec. instead of position data, after 4

hours have passed from the time that is manually programmed.
The manually programmed position data is held for 23.5 hours
only, and after that, “

No Position

” will appear.

➥

“

No Position

” appears when no GPS receiver is

connected and no position data is input manually.

SCAN INDICATOR

➥

“

PRI-SCAN 16

” appears during Priority scan;

“

NORMAL SCAN

” appears during Normal scan. (p. 13)

➥

“

DUAL 16

” appears during Dualwatch; “

TRI 16

” ap-

pears during Tri-watch. (p. 14)

SCRAMBLER INDICATOR

(p. 11)

Appears when the voice scrambler function is activated.

(only when the optional scrambler unit is installed.)

LOCAL INDICATOR

(p. 8)

Appears when the Attenuator function is turned ON.

BUSY/TRANSMIT INDICATOR

(p. 8)

➥

“

BUSY

” appears when receiving a signal or when the

squelch opens.

➥

“

” appears while transmitting.

■

Microphone

Microphone

Speaker

PTT SWITCH [PTT]

Push and hold to transmit; release to receive. (p. 8)

CHANNEL UP/DOWN KEYS [

]/[

]

➥

Push either key to change the operating memory chan-

nel, Set mode settings, etc. (pp. 6, 7, 55)

➥

Checks TAG channels, changes scanning direction or

resumes the scan manually during scan. (p. 13)

TRANSMIT POWER KEY [HI/LO]

➥

Toggles power high and low when pushed. (p. 8)

• Some channels are set to low power only.

➥

While pushing and holding

[HI/LO]

, turn power ON

to toggle the Microphone Lock function ON or OFF.
(p. 10)

Summary of Contents for IC-M504


















































































Search results

Summary of Contents for IC-M504

Reviews:

Related manuals for IC-M504

Brands by name

Popular brands

Icom IC-M504, Instruction Manual

Search results

Summary of Contents for IC-M504

Reviews:

Related manuals for IC-M504

Brands by name

Popular brands