manualshive.com logo in svg

Icom IC-M502, Instruction Manual

Share
Download
Icom IC-M502 Instruction Manual Download Page 29

25

6

DSC OPERATION

Receiving a geographical area call

While monitoring channel 70 and a geographical area call (for
the area you are in) is received:

➥

Emergency alarm or beeps sound depending on the re-
ceived category.

➥

“Geographic Distress,” “Geographic Safety,” “Geographic
Urgency” or “Geographic Routine” appears in the display;
then, the channel specified by the calling station is auto-
matically selected for voice communications.

➥

Monitor the selected channel for an announcement from
the calling ship.

When no GPS receiver is connected or if there is a prob-
lem with the connected receiver, all geographical area calls
are received, regardless of your position.

Receiving a position reply call

While monitoring channel 70 and a position reply call (for the
area you are in) is received:

➥

“Received POS” appears in the display.

When no GPS receiver is connected or if there is a prob-
lem with the connected receiver, all geographical area calls
are received, regardless of your position.

Receiving a position request call

While monitoring channel 70 and a position request call (for
the area you are in) is received:

➥

“POS request” appears in the display.

➥

Push [DSC/ENT] to reply to the call.

When no GPS receiver is connected or if there is a prob-
lem with the connected receiver, all geographical area calls
are received, regardless of your position.

< Smith

 POS request

Received

Ans[DSC/ENT]

LAT: 34°34'N

< TOM

Received POS

LON:135°34'E

Routine

Geographic

< Tokyo CG

Received

Routine

Individual

< Icom3

Received

Summary of Contents for IC-M502































































Reviews:

No comments

Brands by name

Popular brands

Load more brands