manualshive.com logo in svg

Icom IC-M502, Instruction Manual

Share
Download
Icom IC-M502 Instruction Manual Download Page 21

17

6

DSC OPERATION

■

Transmitting DSC calls

Transmitting individual call

The individual call function allows you to transmit a DSC sig-
nal to a specific party only.

q

Select a desired channel other than channel 70.

w

Push [DSC/ENT] to select the DSC menu.

e

Rotate the channel selector to select “individual” and push
[DSC/ENT].

r

Rotate the channel selector to select the desired pre-pro-
grammed individual address; or push [DSC/ENT] while
“Manual set” is displayed, to set the ID code for the indi-
vidual you wish to call.

• The ID code for the individual call can be set in advance. (p. 22)

t

Push [DSC/ENT] to transmit the individual call.

• Channel 70 is selected and the individual call is transmitted to

the selected station.

• If channel 70 is busy, the transceiver standbys until the channel

becomes clear.

• Routine category only is available.

y

Standby on channel 70 until an acknowledgement is re-
ceived.

u

When the acknowledgement is received, the display
changes to the previously selected user channel with
beeps.

i

Push and hold [PTT] to communicate your message to the
responding party.

Individual

Wait for ACK

Completed

To call,

To cancel
[other]

[DSC/ENT]

Individual

To cancel
[other]

Ch70 is BUSY

Push [DSC/ENT] to transmit DSC call.

When Ch70 is busy.

Sel address

 Icom

˘Manual set

 John

Sel item
˘Individual
 INDV ACK
 All ships

Summary of Contents for IC-M502































































Reviews:

No comments

Brands by name

Popular brands

Load more brands