![background image](http://html.mh-extra.com/html/icom/ic-m423/ic-m423_instruction-manual_612804098.webp)
88
10
CONNECTIONS AND MAINTENANCE
■
MB-132 installation
An optional MB-132
flush
mount
is available for mounting
the transceiver to a flat surface, such as an instrument panel.
KEEP
the transceiver and microphone at least 1 meter
away from your vessel’s magnetic navigation compass.
q
Using the template on page 95, carefully cut a hole into
the instrument panel, or wherever you plan to mount the
transceiver.
w
Slide the transceiver through the hole, as shown below.
e
Attach the clamps on either side of the transceiver with two
M5 × 8 mm supplied bolts.
• Make sure that the clamps align parallel to the transceiver body.
r
Tighten the end bolts on the clamps (clockwise) so that the
clamps press firmly against the inside of the instrument
control panel.
t
Tighten the locking nuts (counterclockwise) so that the
transceiver is securely mounted in position, as shown below.
y
Connect the antenna and power cable, then return the in-
strument control panel to its original place.
r
t
Summary of Contents for IC-M423
Page 100: ...90 10 CONNECTIONS AND MAINTENANCE Gasket Mounting base Cap Nut ...
Page 106: ......