![background image](http://html.mh-extra.com/html/icom/ic-m423/ic-m423_instruction-manual_612804033.webp)
23
7
DSC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
D
Entering a Group ID
q
Enter “GROUP ID” in the DSC SETTINGS menu.
w
Push [ADD].
• The “GROUP ID” entry screen is displayed.
e
Enter a desired group ID in the following way:
• Select a desired number using Dial, or [
Y
]/[
Z
]/[
Ω
]/[
≈
].
• Push [ENT] or Dial to set it.
• To move the cursor, select either arrow, “
←
” or “
→
,” then push
[ENT] or Dial.
• Push [EXIT] to return to the normal operating mode.
• Push [BACK] to return to the previous screen.
The first digit is specified as ‘0,’ and the second digit is
other than ‘0’ for a Group ID.
The first two digits are ‘0’ for any Coast station ID.
r
Repeat step
e
to enter the specific 9 digits group code.
t
After entering the 9 digit code, push [ENT] or Dial to set it.
• Group ID name entry screen is displayed.
y
Enter a desired 10 digit ID name in the following way:
• Select a desired character using Dial, or [
Y
]/[
Z
]/[
Ω
]/[
≈
].
• Push [ENT] or Dial to set it.
• To move the cursor, select either arrow, “
←
” or “
→
,” then push
[ENT] or Dial.
• Push [123], [!$?], or [ABC] to select a character group.
u
After entering the ID name, select “FINISH” using Dial, or
[
Y
]/[
Z
]/[
Ω
]/[
≈
], then push [ENT] or Dial to save it.
• The “GROUP ID” list screen is displayed.
i
Push [MENU] to exit the MENU screen.
MENU
➪
DSC Settings
➪
Group ID
(Push [MENU].) (Rotate Dial, then push [ENT].)
Summary of Contents for IC-M423
Page 100: ...90 10 CONNECTIONS AND MAINTENANCE Gasket Mounting base Cap Nut ...
Page 106: ......