![background image](http://html.mh-extra.com/html/icom/ic-m423/ic-m423_instruction-manual_612804095.webp)
85
10
CONNECTIONS AND MAINTENANCE
r
DC POWER CONNECTOR
Connects to a 13.8 V DC power source. (+: Red, –: Black)
CAUTION:
After connecting the DC power cable,
NMEA leads, external speaker leads, and PA speaker
leads, cover the connector and leads with an vulcaniz-
ing tape, as shown below, to prevent water seeping into
the connection.
Rubber vulcanizing
tape
t
GROUND TERMINAL
Connects to a vessel ground to prevent electrical shocks
and interference from other equipment occurring.
Use a PH M3
×
6 screw (user supplied).
NOTE for the IC-M423, IC-M423G, IC-M424, and IC-
M424G:
The location of the ground terminal is the same
as the GPS antenna connector on the IC-M423GE.
y
GPS ANTENNA CONNECTOR
Connects to the supplied GPS antenna. (For only the IC-
M423GE)
NOTE:
Be sure the GPS antenna is positioned where it
has a clear view to receive signal from satellites, and
fixed using the supplied double-sided adhesive pad.
u
COMMAND MICROPHONE JACK
Connects to the optional Command microphone. (p. 89)
D
Connecting to the MA-500TR/MA-510TR
An Individual DSC call can be made to the AIS target using
the transponder without entering the target’s MMSI code.
See the transponder’s instruction manual for connection de-
tails.
Connect each lead to the appropriate lead of the OPC-2014
as follows.
• Listener A (Data-H) (Yellow):
To lead 3.
• Listener B (Data-L) (Green):
To lead 2.
• Talker A (Data-H) (White):
To lead 5.
• Talker B (Data-L) (Brown):
To lead 4.
NOTE:
This instruction is for the MA-500TR. See the MA-
510TR Instruction manual for the MA-510TR’s connecting
instructions.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Summary of Contents for IC-M423
Page 100: ...90 10 CONNECTIONS AND MAINTENANCE Gasket Mounting base Cap Nut ...
Page 106: ......