![background image](http://html.mh-extra.com/html/icom/ic-m37/ic-m37_instruction-manual_612781034.webp)
26
12
TROUBLESHOOTING
The transceiver does not turn ON�
z
The battery is exhausted.
→
Recharge the battery pack. (p. 8)
z
The battery pack is not correctly attached.
→
Correctly reattach the battery pack. (p. 3)
Little or no sound comes from the speaker�
z
Squelch level is set too high.
→
Adjust the squelch level. (p. 12)
z
Volume level is set too low.
→
Adjust the volume level.
z
The speaker has been exposed to water.
→
Use the AquaQuake Water Draining function to remove water from the speaker grill.
You cannot transmit, or cannot select high power�
z
Some channels are set for low power or receive only by regulations.
→
z
The output power is set to low.
→
Push [Hi/Lo] to select high power. (p. 4)
Scan does not start�
z
More than 2 favorite channels are not set.
→
Set the Favorite channels. (p. 15)
No beep sounds�
z
The Key Beep function is OFF.
→
Turn ON the Key Beep function. (p. 18)
The keypad does not work�
z
The keypad is locked.
→
Hold down [ ] for 1 second to lock or unlock the keypad. (p. 4)