![background image](http://html.mh-extra.com/html/icom/ic-m37/ic-m37_instruction-manual_612781023.webp)
15
6
SCAN OPERATION
6
■
Favorite channels
You can quickly recall often-used channels by setting them as Favorite
channels. You can set Favorite channels in each Channel Group.
D
Setting/Clearing
1.
Push [▲] or [▼] to select the channel.
2. Hold down [FAV] for 1 second to set or clear as a Favorite
channel.
•
The selected channel is set as a Favorite channel, and “ ” is
displayed.
D
Selecting
z
Push [FAV].
L
Non-Favorite channels are skipped and not displayed.
TIP:
You can clear all Favorite channels.
L
If there is no Favorite channel, all channels will be set as Favorite
channels.
1. Turn OFF the transceiver.
2. While holding down [FAV], turn ON the transceiver.
■
Starting a scan
(Except the HOL version)
Example:
Starting a Normal Scan.
1. Push [SCAN] to start the scan.
•
“SCAN” blinks during a Normal Scan.
•
“ ” is also displayed during a Priority Scan.
•
“
” is displayed when a signal is received.
L
When a signal is received, the scan pauses until it disappears,
or resumes after 5 seconds, depending on the Set mode
L
2 beeps sound and “ ” blinks when a signal is received on
Channel 16 during a Priority scan.
2. Push [SCAN] to stop the scan.
TIP:
In order to properly receive signals, be sure to adjust the squelch
to a suitable level.