![background image](http://html.mh-extra.com/html/icom/ic-m34/ic-m34_instruction-manual_612768017.webp)
11
4
BASIC OPERATION
4
■
Call channel programming
Call channel is used to access Channel 9 (default), however,
you can program the call channel with your most often-used
channels in each channel group for quick recall.
q
Push and hold
[U/I/C]
(CH/WX) for 1 sec. several times to
select the desired channel group (U.S.A., International or
Canada) to be programmed. (p. 9)
w
Push and hold
[9]
(16) for 1 sec. to select the call channel
of the selected channel group.
• “
CALL
” and call channel number appear.
e
Push and hold
[9]
(16) again for 3
sec. (until a long beep changes to
2 short beeps) to begin call chan-
nel programming.
• Channel number starts blinking.
r
Push
[
Y
Y
]/[
Z
Z
]
to select the desired
channel.
t
Push
[16]
to program the dis-
played channel as the call chan-
nel.
• The channel number stops blinking.
■
Adjusting the volume level
The volume level can be adjusted with
[VOL]
and
[
Y
Y
]
/
[
Z
Z
]
.
q
Push
[VOL]
, then adjust the volume level with
[
Y
Y
]
/
[
Z
Z
]
.
• “
VOL
” indicator starts blinking.
• There are 31 volume levels and OFF.
• When no key is pushed for 5 sec., the transceiver returns to nor-
mal condition.
w
Push
[VOL]
again to return to normal condition.
■
Volume mute function
The volume mute function can be activated temporarily with
[MUTE]
(VOL).
q
Push and hold
[MUTE]
(VOL) for 1 sec to activate the vol-
ume mute function.
• The audio is muted.
• The volume level indicator starts blinking.
w
Push
[VOL]
again or turn power OFF to turn the volume
mute function OFF.
Indicates the
volume level.
Blinks during volume level adjustment.