background image

16

DUALWATCH/TRI-WATCH

6

Description

Dualwatch monitors Channel 16 while you are receiving 
on another channel; Tri-watch monitors Channel 16 and the
call channel while receiving another channel. Dualwatch/Tri-
watch is convenient for monitoring Channel 16 when you are
operating on another channel.

Operation

q

Select Dualwatch or Tri-watch in set mode. (p. 19)

w

Select the desired channel.

e

Push and hold 

[DUAL]

(SCAN) for 1 sec. to start Dual-

watch or Tri-watch (depending on set mode setting).

• “

DUAL

” blinks during dualwatch; “

TRI

” blinks during tri-watch.

• A beep tone sounds when a signal is received on Channel 16.
• Tri-watch becomes dualwatch when receiving a signal on the call

channel.

r

To cancel dualwatch/tri-watch, push 

[SCAN]

again.

DUALWATCH/TRI-WATCH SIMULATION

• If a signal is received on Channel 16, dualwatch/tri-watch

pauses on Channel 16 until the signal disappears.

• If a signal is received on the call channel during Tri-watch,

Tri-watch becomes Dualwatch until the signal disappears.

• To transmit on the selected channel during Dualwatch/Tri-

watch, push and hold 

[PTT]

.

Dualwatch

Tri-watch

Call channel

[Example]:

Operating Tri-watch on INT channel 07.

Tri-watch starts.

Signal is received on call 
channel.

Signal received on Channel 
16 takes priority.

Tri-watch resumes after 
the signal disappears.

Summary of Contents for IC-M34





































Reviews: