![background image](http://html.mh-extra.com/html/icom/ic-m32/ic-m32_service-manual_612760004.webp)
1 - 1
‘
‘
GENERAL
• Frequency coverage
: 156.025–157.425 MHz
156.050–163.275 MHz
• Type of emission
: 16K0G3E
• Antenna impedance
: 50
Ω
• MIC impedance
: 2 k
Ω
• Audio impedance
: 8
Ω
• Power supply requirement
: 7.2 V DC (negative ground; supplied battery pack)
• Current drain (approx.)
: Transmit
at High (5.0 W)
1.5 A
at Low (1.0 W)
0.7 A
Receive
max audio
200 mA
• Frequency stability
: ±10 ppm
• Usable temperature range
: –20˚C to +60˚C; –4˚F to +140˚F
• Dimensions (projections not included)
: 61(W)
×
135(H)
×
41(D) mm; 2
13
⁄
32
(W)
×
5
5
⁄
16
(H)
×
1
5
⁄
8
(D) in.
• Weight (approx.)
: 360 g; 12.7 oz. (with BP-224)
‘
‘
TRANSMITTER
• RF output power
: 5 W / 1 W (High / Low)
(with supplied battery pack)
• Modulation system
: Variable reactance frequency modulation
• Maximum frequency deviation
: ±5.0 kHz
• Spurious emissions
: 68 dB
• Adjacent channel power
: 70 dB
• Transmitter audio distortion
: Less than 10 % at 1 kHz, 60% deviation
• Residual modulation
: 40 dB
• Audio frequency response
: +1 dB to –3 dB of 6 dB octave from 300 Hz to 3000 Hz
‘
‘
RECEIVER
• Receive system
: Double conversion superheterodyne system
• Intermediate frequencies
: 1st
21.7 MHz
2nd
450 kHz
• Sensitivity
: 0.25 µV at 12 dB SINAD
• Squelch sensitivity
: 0.35 µV at threshold
• Adjacent channel selectivity
: 70 dB (typical)
• Spurious response rejection
: 70 dB (typical)
• Intermodulation rejection ratio
: 70 dB (typical)
• Hum and noise
: 40 dB
• Audio output power
: 350 mW typical at 10% distortion with an 8
Ω
load
• Audio frequency response
: +1 dB to –3 dB of –6 dB octave from 300 Hz to 3000 Hz
Specifications are measured in accordance with EIA/TIA-603.
All stated specifications are subject to change without notice or obligation.
SECTION 1 SPECIFICATIONS