DTMF AUTODIAL KEY
“
DTMA
”
➥
Push to enter the DTMF channel selection mode. Then select
the desired DTMF channel using [CH Up]/[CH Down].
➥
After selecting the desired DTMF channel, push this key to
transmit the DTMF code.
CALL KEYS
“
CALL
”/“
CALA
”/“
CALB
”
Push to transmit a 2/5-tone ID code.
• Call transmission is necessary before calling another station depend-
ing on your signalling system.
• [Call A] and/or [Call B] may be available when your system employs
selective ‘Individual/Group’ calls. Ask your dealer which call is
assigned to each key.
EMERGENCY KEYS
“
EMR
”
Push and hold for a specified period to transmit an emergency
call.
• If you want to cancel the emergency call, push (or push and hold)
the key again before transmitting the call.
• The emergency call is transmitted one time only or repeatedly until
receiving a control code depending on the pre-setting.
SURVEILLANCE KEY
“
SURV
”
Push to turn the surveillance function ON or OFF.
When this function is turned ON, the beep is not emitted and
the LCD backlight does not light when a signal is received or
a key is pushed, etc.
TX CODE ENTER KEY
“
TXCE
” (PMR operation only)
Push to enter the ID code edit mode directly, for 5-tone. Then
set the desired digit using [CH Up]/[CH Down] or 10-keypad*.
(p. 15)
*IC-F70DT/T or IC-F80DT/T only
TX CODE CHANNEL SELECT KEY
“
TXC
”
➥
Push to enter the ID code channel selection mode directly.
Then set the desired channel using [CH Up]/[CH Down].
(p. 14)
➥
During ID code channel selection mode, push for 1 sec. to
enter the ID code edit mode for 5-tone. Then set the desired
digit using [CH Up]/[CH Down] or 10-keypad*. (p. 15)
*IC-F70DT/T or IC-F80DT/T only
TX CODE CHANNEL UP/DOWN KEYS
“
TXCU
”/“
TXCD
”
Push to select a TX code channel directly.
ID-MR SELECT KEY
“
IDMS
” (PMR operation only)
➥
Recalls detected ID codes.
• Push this key, then select the ID code using [CH Up]/[CH
Down].
• Up to 5 ID’s are memorized.
➥
Push and hold to erase the selected ID’s.
SCRAMBLER FUNCTION
“
SCR
”
Push to toggle the voice scrambler function ON and OFF.
9
2
PANEL DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Summary of Contents for IC-F70DT
Page 38: ...MEMO...