![background image](http://html1.mh-extra.com/html/icom/ic-f70dt/ic-f70dt_instruction-manual_4291383011.webp)
■
Programmable function keys
The following functions can be assigned to
[EMERGENCY]
,
[UP]
,
[DOWN]
,
[MONITOR]
,
[P0]
,
[P1]
,
[P2]
and
[P3]
pro-
grammable function keys.
Consult your Icom dealer or system operator for details con-
cerning your transceivers programming.
If the programmable function names are bracketed in the fol-
lowing explanations, the specific key is used to activate the
function depends on the programming.
CH UP AND DOWN KEYS
“
UP
” “
DOWN
”
➥
Push to select an operating channel.
➥
Push to select a transmit code channel after pushing [TX
Code CH Select].
➥
Push to select a DTMF channel after pushing [DTMF Au-
todial].
➥
Push to select a scan group after pushing and holding
[Scan A Start/Stop]/[Scan B Start/Stop].
➥
Push to select an Individual ID code or Talkgroup ID code
after pushing [Individual] or [Talkgroup].
ZONE KEY
“
ZONE
”
Push this key, then select the desired zone using [CH Up]/
[CH Down].
What is “zone”?
— The desired channels are assigned
into a zone according to the intended use for grouping. For
example, ‘Staff A’ and ‘Staff B’ are assigned into a “Busi-
ness” zone, and ‘John’ and ‘Cindy’ are assigned into a “Pri-
vate” zone.
SCAN A START/STOP KEY
“
SCNA
”
➥
This key’s operation depends on the Power ON Scan setting.
When the power ON scan function is turned OFF;
Push to start and cancel scanning operation. In case of
transmission during scan, cancels scanning.
When the power ON scan function is turned ON;
Push to pause scanning. Scanning resumes after a specified
time period has passed. In case of transmission during scan,
pauses scanning. Scanning resumes after a specified time
period has passed after the transmission is finished.
➥
Push and hold this key for 1 sec. to indicate the scan group,
then select the desired group using [CH Up]/[CH Down].
SCAN B START/STOP KEY
“
SCNB
”
➥
Push to start and cancel scanning operation. In case of
transmission during scan, pauses scanning. Scanning re-
sumes after a specified time period has passed after the
transmission is finished.
➥
Push and hold this key for 1 sec. to indicate the scan
group, then select the desired group using [CH Up]/
[CH Down].
7
2
PANEL DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Summary of Contents for IC-F70DT
Page 38: ...MEMO...