![background image](http://html1.mh-extra.com/html/icom/ic-f6062/ic-f6062_instruction-manual_4282309013.webp)
10
2
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
D
TX code number edit
(PMR or BIIS PMR operation only)
If the transceiver has [TX Code CH Select] or [TX Code
Enter] assigned to it, TX code contents can be edited within
the allowable digits.
USING [TX CODE CH SELECT] KEY:
q
Push [TX Code CH Select] to enter the TX code channel
selection mode.
• Select the desired channel before entering the TX code channel
selection mode if necessary.
w
Push [TX Code CH Select] for 1 sec. to enter the TX code
edit mode.
e
Push [TX Code CH Select] to select the desired digit to be
edited.
• The digit to be edited blinks.
r
Push [CH Up] or [CH Down] to set the desired digit.
t
Push [TX Code CH Select] to set the digit. The digit to the
right will blink automatically.
y
Repeat
r
and
t
to input all allowable digits.
u
Push [Call] to transmit the edited TX code.
USING [TX CODE ENTER] KEY:
q
After pushing [TX Code CH Select], push [CH Up] or [CH
Down], or push [TX Code CH Up] or [TX Code CH Down]
to select the desired TX code channel.
w
Push [TX Code Enter] to enter the TX code edit mode.
• The digit to be edited blinks.
e
Push [TX Code Enter] to select the desired digit to be edit-
ed.
r
Push [CH Up] or [CH Down] to set the desired digit.
t
Push [TX Code Enter] to set the digit. The digit to the right
will blink automatically.
y
Repeat
r
and
t
to input all allowable digits.
u
Push [Call] to transmit the edited TX code.