![background image](http://html1.mh-extra.com/html/icom/ic-f5122d/ic-f5122d_operating-manual_4285683012.webp)
9
2
dPMR OPERATION
IMPORTANT:
Setting an individual emergency channel is
recommended for dependable emergency call operation.
NOTE:
When the Digital Request Ack function is activated, the
transceiver transmits an emergency call with a request to
send back an acknowledgment.
■
Position data transmission
When a GPS receiver is connected to the transceiver, the
position (longitude and latitude) data can be automatically
transmitted:
• When the GPS request status message is received
• After sending a voice message
- Set the ‘Send with Log-off’ item to ‘Enable.’
• After sending a status message
- Set the ‘Send with Status Call’ item to ‘Enable.’
• After sending a message
- Set the ‘Send with SDM Call’ item to ‘Enable.’
• After sending an Emergency call
- Set the ‘Send with Emergency’ item to ‘Enable.’
Ask your dealer or system operator for connection details.
■
Status message transmission
A status message can be automatically transmitted.
A status message is transmitted:
• When the transceiver is turned ON or turned OFF
- Set a status message to be transmitted in ‘Power ON Status’ or
‘Power OFF Status’ item, respectively.
- Set the target station ID in ‘Power Status ID.’
• After sending a voice message
- Set the ‘
Send with Log-off
’ item to ‘Enable.’
- Set a status message to be transmitted in the ‘Send Status
Number’ item.