7
2
dPMR OPERATION
■
Transmitting a call
dPMR operation allows you to make a call to a specific station
(Individual call) or to a specific group (Talkgroup call). Other
digital mode transceivers on the channel will not hear a call
that does not match their Individual or Talkgroup ID.
D
Transmitting a Voice Call
q
Push
[dPMR Button]
to enter the ID selection mode.
• The preprogrammed ID name is displayed.
• When an ID name is not programmed, ID code is displayed.
• The primary ID can be preset to display first.
w
Push
[CH Up]
or
[CH Down]
to select a desired Individual
ID or Talkgroup ID.
• The IDs can be edited within the allowable digits. See the column
to the right for details.
* This illustration shows an Individual type call.
e
Hold down
[PTT]
, then speak into the microphone.
r
Release
[PTT]
to receive.
• Editing an ID
If the transceiver has a key assigned to the TX Code Enter
function, you can edit an ID within the allowable digits.
q
Push
[TX Code Enter]
to enter the ID edit mode.
• The digit to be edited blinks.
w
Push
[TX Code Enter]
to select a desired digit to be ed-
ited.
e
Push
[CH Up]
or
[CH Down]
to select a desired
number.
r
Push
[TX Code Enter]
to set. The digit to the right will
automatically blink.
t
Repeat step
e
and
r
to input all allowable digits.
y
After editing, push
[TX Code Enter]
to store the set-
ting.
• The transceiver returns to the stand-by mode.
NOTE:
Changing the channel or turning OFF the transceiver
discards the new ID, and returns the original one.
