![background image](http://html2.mh-extra.com/html/icom/ic-f50v/ic-f50v_service-manual_3743880006.webp)
3 - 1
SECTION 3
DISASSEMBLY INSTRUCTION
1. REMOVING THE CHASSIS UNIT
q
Unscrew the ANT nut, and remove the VR knob.
w
Remove the VR washer, and unscrew the top screw.
e
Unscrew side screws and washers.
r
Unscrew bottom screws.
t
Take off the CHASSIS UNIT in the direction of the
arrow.
y
Disconnect the flat cable from the CHASSIS UNIT
(MAIN UNIT).
2. REMOVING THE FRONT UNIT
q
Disconnect the VR cable from J402.
w
Disconnect the flat cable from J403.
3. REMOVING THE MAIN UNIT
q
Unsolder 6 points from the shield cover.
w
Unsolder 4 points from the contact spring.
e
Unsolder 1 point from the antenna connector.
Unsolder ×6
(shield cover)
Unsolder ×4
(contact spring)
Unsolder ×1
(antenna connector)
MAIN UNIT
CHASSIS
VR knob
ANT nut
Flat cable
VR washer
Top screw
Side screw & Washer
Bottom screws
Side scre
w & w
asher
r
Unscrew 2 screws, and remove the shield cover.
t
Disconnect the motor connector* from the MAIN UNIT.
Shield cover
Unscrew ×2
Disconnect
(motor connector)
CHASSIS
MAIN UNIT
Unscrew ×5
CHASSIS
MAIN UNIT
y
Unscrew 5 screws, and take off the MAIN UNIT.
VR cable
Flat cable
J403
J402
e
Unscrew 4 screws.
r
Unsolder 2 points (at the speaker leads).
t
Take off the FRONT UNIT in the direction of the
arrow.
FRONT UNIT
Unscrew ×4
Unsolder ×2
(Speaker leads)
*
*: Except [A], [D], [G], [J]