![background image](http://html1.mh-extra.com/html/icom/ic-f4200dex/ic-f4200dex_instructions-manual_4267959035.webp)
28
4
dPMR OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Receiving a Group call
D
When a Group call is received:
q
• The LED indicator blinks orange.
• Beeps sound and the mute is released.
Hold down [PTT], then speak into the microphone.
w
NOTE:
Only one station is allowed to speak at the same
time.
Release [PTT] to receive.
e
After the communication is finished, push [Clear] to send a ‘Dis-
r
connect’ signal to terminate the connection.
NOTE:
The LED indicator or Beeps may differ, depending on the
presetting. Ask your dealer for details.
Receiving a Stun, Kill or Revive
D
If an individual Stun or Kill call is received, the transceiver will au-
tomatically transmit an acknowledgement, and then you cannot re-
ceive* or transmit.
* Reception may be available, depending on the presetting of the re-
ceived stun command.
When a Stun command is received:
➥
• The transceiver cannot be operated until the individual revive call is
received or until data cloning is performed.
• Even if [ROTARY SELECTOR] is changed, the transceiver will stay
on the same channel the Stun command received on.
When a Kill command is received:
➥
• The LED indicator alternately blinks red and green.
• The transceiver cannot be operated until data cloning is performed.
Ask your dealer for details.
NOTE:
Depending on the presetting, the transceiver may ignore
the Stun, Revive and Kill commands, that are from a non-speci-
fied station.