![background image](http://html1.mh-extra.com/html/icom/ic-f3061t/ic-f3061t_instruction-manual_4261507021.webp)
17
5
CONVENTIONAL OPERATION
5
■
Emergency transmission
When [Emergency Single] or [Emergency Repeat] is
pushed, an emergency signal is automatically transmitted for
the specified time period.
When [Emergency] is pushed, the DTMF emergency signal
is transmitted on the priority channel.
When [Emergency Single] or [Emergency Repeat] is pushed
for the specified time period, the DTMF emergency signal is
transmitted once or repeatedly on the emergency channel.
However, when no emergency channel is specified, the sig-
nal is transmitted on the previously selected channel.
■
Scrambler function
The voice scrambler function provides private communi-
cation between stations. The frequency inversion type is
equipped to all versions, moreover, the optional Rolling or
Non-rolling type can be available.
q
Push [Scrambler] to turn the scrambler function ON.
• “ ” appears.
w
Push [Scrambler] again to turn the scrambler function
OFF.
• “ ” disappears.
■
Stun function
When the specified ID, set as a killer ID, is received, the stun
function is activated.
When the killer ID is received, the transceiver switches to
the password required condition. Entering of the password
via the keypad is necessary to operate the transceiver again
in this case.
■
Priority A channel selection
When one of the following operations is performed, the
transceiver selects the Priority A channel automatically.
Priority A is selected when;
• Clear down signal is received/transmitted
- Set the ‘Move to PrioA CH’ item as ‘Clear down.’
• Turning the power ON
The Priority A channel is selected each time the trans-
ceiver power is turned ON.
• Status call
The Priority A channel is selected when transmitting a
status call.
Summary of Contents for IC-F3061T
Page 35: ...31 MEMO 10...