![background image](http://html1.mh-extra.com/html/icom/ic-f3061t/ic-f3061t_instruction-manual_4261507020.webp)
16
5
CONVENTIONAL OPERATION
D
Talkgroup ID code selection
If the transceiver has [Talkgroup] assigned to it, the indica-
tion can be toggled between the operating channel name
(and the channel number)* and the Talkgroup ID name (or
ID code if the ID name is not programmed.) When the Talk-
group ID name (or ID code) is displayed, [CH Up] or [CH
Down] selects the desired Talkgroup ID name (or ID code).
q
Push [Talkgroup]— Talkgroup ID name (or ID code) ap-
pears.
w
Push [CH Up] or [CH Down] to select the desired Talk-
group ID name (or ID code).
e
Push [PTT] to transmit the selected Talkgroup ID.
D
TX Status message selection
If the transceiver has [TX Status] assigned to it, the indica-
tion can be toggled between the operating channel name
(and the channel number)* and the Status message (and the
Status channel.)* When the Status message (and the Status
channel)* is displayed, [CH Up] or [CH Down] selects the
desired Status message.
q
Push [TX Status]— Status message (and Status chan-
nel)* appears.
w
Push [CH Up] or [CH Down] to select the desired Status
message.
e
Push [PTT] to transmit the selected Status message.
* Only when the 2 lines indication mode is selected.
■
User set mode
User set mode is accessed at power ON and allows you to
set seldom-changed settings. In this case you can “custom-
ize” the transceiver operation to suit your preferences and
operating style.
Entering the user set mode:
q
While pushing and holding [P1] and [P2], rotate [VOL]
to turn the power ON. Then, push and hold [P0] to enter
user set mode.
w
Push [P0] several times to select the appropriate item.
Then push [Side2] or [Side3] to set the desired level/con-
dition.
• Available set mode functions are
Backlight
,
LCD contrast
,
Beep
,
Beep Level
,
Ringer Level
,
SQL Level
,
AF Min Level
,
Mic Gain
,
VOX Gain
,
VOX Delay
,
Battery Voltage
and
Signal
Moni
.
e
Rotate [VOL] to turn the power OFF to exit user set mode.
NOTE:
User set mode is also available via a programma-
ble key. Please refer to (p. 9) [User Set Mode]
section.
Summary of Contents for IC-F3061T
Page 35: ...31 MEMO 10...