Icom IC-F3061T, Instruction Manual

Page: 10 / 36

6
2
PANEL DESCRIPTION
y
BELL INDICATOR
Appears/blinks when the specific 2-tone/DTMF select call
is received, according to the pre-programming.
u
CALL CODE MEMORY INDICATOR
Appears when the call code memory is selected.
i
BATTERY INDICATOR
Indicates remaining battery power.
Indication
Full Middle
Charging
required
No battery Battery level
blinks when the battery is exhausted.
blinks when the battery is over charged.
o
ALPHANUMERIC DISPLAY
➥
Displays an operating channel number, channel name,
Set mode contents, DTMF code, etc.
➥
The indication mode can be selected from 1 line or 2
lines. Ask your dealer for details.
• In this instruction manual, the LCD illustration is described
using the 2 lines indication mode.
!0
KEY INDICATOR
Indicate the programmed function of the front panel keys
([P0], [P1], [P2] and [P3]).
■
Programmable function keys
The following functions can be assigned to
[Emer]
,
[Side1],
[Side2] , [Side3] , [P0] , [P1] , [P2] and [P3] programmable
function keys.
Consult your Icom dealer or system operator for details con-
cerning your transceivers programming.
If the programmable function names are bracketed in the fol-
lowing explanations, the specific key is used to activate the
function depends on the programming.
CH UP AND DOWN KEYS “
UP
” “
DOWN
”
➥
Push to select an operating channel.
➥
Push to select a transmit code channel after pushing [TX
Code CH Select].
➥
Push to select a DTMF channel after pushing [DTMF Au-
todial].
➥
Push to select a scan group after pushing and holding
[Scan A Start/Stop]/[Scan B Start/Stop].
ZONE KEY
“
ZONE
”
Push this key, then push [CH Up] or [CH Down] to select the
desired zone.
What is “zone”?
— The desired channels are assigned
into a zone according to the intended use for grouping.
For example, ‘Staff A’ and ‘Staff B’ are assigned into a
“Business” zone, and ‘John’ and ‘Cindy’ are assigned into
a “Private” zone.