![background image](http://html1.mh-extra.com/html/icom/ic-f3022t-s/ic-f3022t-s_instruction-manual_4256183012.webp)
8
2
PANEL DESCRIPTION
SIREN KEY
Push to emit a siren.
TX CODE ENTER KEY
Push to enter the ID code edit mode directly, for 5-tone. Then set
the desired digit using [CH Up]/[CH Down] or 10-keypad*. (p. 13)
*10-key versions only
TX CODE CHANNEL SELECT KEY
➥
Push to enter the ID code channel selection mode directly.
Then set the desired channel using [CH Up]/[CH Down].
(p. 12)
➥
During ID code channel selection mode, push and hold
for 1 sec. to enter the ID code edit mode for 5-tone code.
Then set the desired digit using [CH Up]/[CH Down] or
10-keypad*. (p. 12)
*10-key versions only
TX CODE CHANNEL UP/DOWN KEYS
Push to select a TX code channel directly.
ID-MR SELECT KEYS
➥
Recalls detected ID codes.
• Push this key, then select the ID code using [CH Up]/[CH Down].
• Up to 5 ID’s are memorized.
➥
Push and hold for 1 sec. to erase the selected ID’s.
LONE WORKER KEY
Push to turn the Lone Worker function ON or OFF.
• If the Lone Worker function is activated, the Emergency function is
automatically turned ON after the specified time period has passed
with no operation is performed.
SCRAMBLER FUNCTION
Push to toggle the voice scrambler function ON and OFF.
USER SET MODE KEY
➥
Push and hold for 1 sec. to enter user set mode.
• During in the user set mode, push this key to select an item that
is enabled by your dealer, and change the value or condition by
pushing [CH Up] or [CH Down].
➥
Push and hold this key for 1 sec. again to exit user set mode.
User set mode is also available via the ‘Power ON function.’
Refer to (p. 13) also.
OPT OUT KEYS
Push to control the output signal level of the optional ports in
the optional unit connector.
OPT MOMENTARY KEYS
Controls the output signal level of the optional ports in the
optional unit connector while pushing and holding this key.