![background image](http://html1.mh-extra.com/html/icom/ic-f3022t-s/ic-f3022t-s_instruction-manual_4256183016.webp)
12
3
BASIC OPERATION
D
TX code channel selection
If the transceiver has [TX Code CH Select] assigned to it, the
indication can be switched between the operating channel
number (or name) and TX code channel number (or name).
When the TX code channel number (or name) is displayed,
[CH Up] or [CH Down] selects the TX code channel.
USING [TX CODE CH SELECT] KEY:
q
Push [TX Code CH Select]— a TX code channel number
(or name) appears.
w
Push [CH Up] or [CH Down] to select the desired TX code
channel.
e
After selecting, push [TX Code CH Select] to set.
• Return to the stand-by mode.
r
Push [Call] to transmit the selected TX code.
USING [TX CODE CH UP]/[TX CODE CH DOWN] KEY:
If the transceiver has [TX Code CH Up] or [TX Code CH
Down] assignment, the programmed TX code channel can
be selected directly when pushed.
D
TX code number edit
If the transceiver has [TX Code CH Select] or [TX Code
Enter] assigned to it, TX code contents can be edited within
the allowable digits.
USING [TX CODE CH SELECT] KEY:
q
Push [TX Code CH Select] to enter the TX code channel
selection mode.
• Select the desired channel with [CH Up] or [CH Down] if neces-
sary.
w
Push and hold [TX Code CH Select] for 1 sec. to enter
the TX code edit mode.
e
Push [TX Code CH Select] several times to select the de-
sired digit to be edited.
• The digit to be edited blinks.
r
Push [CH Up], [CH Down] or 10-keypad* to set the de-
sired digit.
t
Push [TX Code CH Select] to set the digit. The digit to the
right will blink automatically.
• When the 10-keypad* is used for setting, the digit to be edited moves
to the right automatically without pushing [TX Code CH Select].
y
Repeat
r
and
t
to input all allowable digits.
u
After setting the last digit, push [TX Code CH Select] to
set the code and return to the stand-by mode.