Icom IC-F3, Instruction Manual

Page: 3 / 20

D
UNPACKING
The transceiver comes supplied with
the following accessories*.
q
Flexible antenna
w
Belt clip
e
1922A REAR-SHEET
*The BP-196
BATTERY PACK
comes at-
tached to the transceiver.
D
BELT CLIP
Attach the belt clip to the transceiver as illustrated below.
D
ANTENNA
The antenna screws onto the trans-
ceiver as illustrated below.
Attach the belt-clip
Release the belt-clip
q
w
e
GETTING STARTED
1
1
D
TURNING POWER ON
Rotate the volume control to the 12 o’clock
position.
• A power-up alert tone sounds for about
2 sec. and an opening message may
appear.
(Above functions depend on pre-setting.)
Then a channel number appears on the
display.
Channel number may differ from this.
NOTE: If the power-up alert tone does
not sound or a channel number does
not appear on the display, turn the
transceiver OFF, check the battery,
then turn the transceiver back ON.
If the power-up tone still does not
sound or a channel number does not
appear, charge the battery or replace
it.
NOTE: To increment or decrement the
displayed channel, push [
Y
] or [
Z
]
keys.
MR
IC-F3/S,F4/S SMATRA 7/29 01.12.5 6:02 PM ページ1