![background image](http://html1.mh-extra.com/html/icom/ic-f3/ic-f3_instruction-manual_4272203012.webp)
SmarTrunk II
TM
OPERATION
5
10
D
D
Memory speed-dialing *
2
To automatically dial a commonly used number from memory:
• Push [
M
] followed by the memory location (0–9).
D
D
Placing a telephone call *
2
Enter the phone number followed by [1], [
M
].
• A high-pitched beep indicates that the number is accepted.
• When the called party answers, push the [PTT] switch to
talk, and release it to listen.
D
D
Calling another local system subscriber *
2
Enter the subscriber number followed by [3], [
M
].
• A high-pitched beep indicates that the number is accepted.
• You hear ringing, then two short beeps when the subscriber
answers.
• If the other subscriber is on another call or out of range, you
hear a fast busy signal and the call terminates automatically.
*1: This function is available for the IC-F3S/IC-F4S when the
[
Y
Y
]/[
Z
Z
]
keys are assigned the [
M
]/[
#
] key functions.
*2: This function is available for the IC-F3/IC-F4 only.
Use the Turbo SpeeDial function instead.
For additional operating instructions, contact your Dealer
or System Operator.
D
D
Clear channel alerting *
1
If all channels are busy, the transceiver automatically begins
searching for an open channel and beeps every ten seconds.
When two short beeps (low-pitched, then high-pitched) are
heard, a channel is available. Push [
M
], [
M
] immediately to
redial the last number.
D
Turbo SpeeDial
To automatically dial a commonly used number with one
push:
• Push one of the turbo SpeeDials :
IC-F3/IC-F4: [A], [B], [C] or [D]
IC-F3S/IC-F4S: [P0],[P1], [P2], [P3], or [–]
D
D
Programming memory speed dial
q
Push and hold [
M
] until you hear a high-pitched beep.
w
Enter the memory location (0–9, A, B, C, D), the telephone
or subscriber number, then [1], [
M
] (or [3], [
M
] if for an-
other system subscriber).
• A high-pitched beep indicates successful programming.
• Memories [A]–[D] are used for the Turbo SpeeDial.
NOTE:
This function is available for the IC-F3/IC-F4 only.
D
D
Emergency call *
2
Push [0], [
M
] to initiate an emergency call.
• Contact your Dealer for details.
IC-F3/S,F4/S SMATRA 7/29 01.12.5 6:02 PM ページ10
Summary of Contents for IC-F3
Page 1: ......
Page 4: ...y u i o S...
Page 13: ...ALLATION 6 11 e r w Fig 1 Fig 2 q...
Page 20: ...Hirano ku Osaka 547 0003 Japan...