3
Section
2
PROGRAMMABLE KEY FUNCTIONS
Programmable key functions
If you use the CS-F29SR
cLOning
sOFtware
(purchase
separately), you can assign the functions described be-
low to
[TOP]
,
[Upper]
, and
[Lower]
.
NOTE:
Refer to the instruction sheet that comes with
the transceiver for the default settings of these keys.
SCAN START/STOP
Push to start and cancel a scan.
➥
• When a scan is started with the Power ON Scan or Auto
-
matic scan function, push this key to pause it. The paused
scan resumes after a set time period.
PRIORITY A CHANNEL,
PRIORITY B CHANNEL
Push to select the Priority A or Priority B channel.
➥
PRIORITY A CHANNEL (REWRITE),
PRIORITY B CHANNEL (REWRITE)
Push to select the Priority A or Priority B channel.
➥
Hold down to set the operating channel as the Prior-
➥
ity A or Priority B channel.
MEMORY CHANNELS 1, 2, 3, 4
Push to select memory channel 1, 2, 3, or 4.
➥
MONI
Push to turn the CTCSS (DTCS) mute ON or OFF.
➥
While holding down this key, the transceiver opens
➥
any squelch, or releases any mute.
LOCK
Hold down to turn the Key Lock function ON or OFF.
➥
• Even when the Lock function is ON,
[MONI]
and
[SUR-
VEILLANCE]
are not locked.
SURVEILLANCE
Hold down to turn ON the Surveillance function.
➥
Push to turn OFF the function.
➥
• When this function is ON and a signal is received, a beep
does not sound and the status indicator does not light,
even if you push any key.
SIREN
Hold down to emit a siren sound.
➥
• The transceiver keeps emitting the siren sound until the
transceiver’s power is turned OFF.
• This function is for situations other than an emergency
alert, such as a security alarm.
SCRAMBLER
Hold down to turn ON the Voice Scrambler function.
➥
Push to turn OFF the function.
➥
COMPANDER
Hold down to turn ON the Compander function.
➥
Push to turn OFF the function.
➥
• The Compander function reduces noise components
from the transmitted audio to provide clear communica-
tion.
S-RING/C-RING
Push to make a Smart-Ring call.
➥
Hold down to make a Call-Ring call.
➥
ANNOUNCE
Push to turn the Channel Announce function ON or
➥
OFF.
• The transceiver announces the position of [Rotary Selec
-
tor].
NOTE:
When the Beep function is OFF, the operat-
ing channel is not announced, regardless of this set-
ting. (p. 5)
[TOP]
[Lower]
[Upper]
