![background image](http://html2.mh-extra.com/html/icom/ic-f1000-series/ic-f1000-series_operating-manual_4189746019.webp)
16
2
BASIC OPERATION
2
16
15
14
13
12
11
10
9
8
7
6
5
4
3
1
■
Setting the Beep function
These instructions are for the non-display type transceivers.
The Beep function can be turned ON or OFF. When it is OFF,
the channel announcement is also turned OFF.
NOTE:
You should turn ON the Beep function when you set the
Beep level, the Ringer level, the microphone gain, and the
squelch level.
Rotate
q
[VOL] to turn the transceiver power OFF.
Set
w
[ROTARY SELECTOR] to any channel other than
Channel 16.
While holding down
e
[Lower], rotate [VOL] to turn ON the
power to enter the Beep level adjustment mode.
Push
r
[Lower] to turn the Beep function ON or OFF.
• When a beep sounds after pushing
[Lower], the Beep function
is ON. When no beep sounds after pushing
[Lower], the Beep
function is OFF.
• The transceiver stores the setting every time you change it.
• If desired, push
[Upper] to adjust the Beep level. See page 17
for details.
Rotate
t
[VOL] to turn OFF the power to exit the Beep level
adjustment mode.
[ROTARY SELECTOR]
[VOL]
[Lower]
[Upper]